BQXDL - BE-51 BIS(ALLYL ETHER) OF TETRABROMOBISPHEN
- MSDS: BQXDL
- Manufacturer: GREAT LAKES CHEMICAL CORP
- Product Name: BE-51 BIS(ALLYL ETHER) OF TETRABROMOBISPHEN
- National Stock Number: 6850-00N038145
Product Identification
Product ID:BE-51 BIS(ALLYL ETHER) OF TETRABROMOBISPHEN
MSDS Date:08/01/1986
FSC:6850
NIIN:00N038145
MSDS Number: BQXDL
Responsible Party
WEST LAFAYETTE, IN 47906
US
Emergency Phone: 501-862-5141
Info Phone: 317-463-2511
Preparer: RESEARCH SERVICES DEPT
Cage: 2E394
Contractor
Telephone: 765-497-6100/800-949-5167
Cage: 2E394
Ingredients
BIS (ALLYL ETHER) OF TETRABROMOBISPHENOL A
CAS: 25327-89-3
Fraction By Weight: 98%
Hazards
LD50 LC50 Mixture:LD50 (ORAL,RAT): >5 G/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MILD EYE AND MINIMAL SKIN IRRITATION
IS OBSERVED IN TESTS WITH RABBITS. OTHER THAN THE POTENTIAL FOR
IRRITATION THERE ARE NOT KNOWN ACUTE HEALTH HAZARDS. CHRONIC:
HAZARDS ARE UNKNOWN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:CONTACT MAY RESULT IN EYE AND SKIN IRRITATION.
Medical Cond Aggravated by Exposure:EXISTING DERMATITIS MAY BE
AGGRAVATED BY EXPOSURE.
First Aid
First Aid:INGESTION: GIVE PERSON PLENTY OF WATER TO DRINK. GET MEDICAL
ATTENTION IMMEDIATELY. SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH
FOR AT LEAST 15 MINUTES WITH WATER; OBTAIN MEDICAL ASSISTANCE.
INHALATIO N: REMOVE VICTIM TO FRESH AIR; ADMINISTER ARTIFICIAL
RESPIRATION IF NECESSARY; OBTAIN MEDICAL ASSISTANCE. CLOTHING: WASH
CONTAMINATED CLOTHING BEFORE REUSE.
Fire Fighting
Extinguishing Media:ALL CONVENTIONAL EXTINGUISHING MEDIA SUITABLE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:IN FIRES FUELED BY OTHER MATERIALS,
HYDROGEN BROMIDE AND/OR BROMINE.
Accidental Release
Spill Release Procedures:SWEEP UP SPILL AND PLACE IN SUITABLE CONTAINER
FOR DISPOSAL. WEAR PROTECTIVE EQUIPMENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY AREA.
Other Precautions:NONE.
Exposure Controls
Respiratory Protection:WEAR NIOSH/MSHA APPROVED DUST RESPIRATOR WHERE
DUSTING OCCURS.
Ventilation:LOCAL EXHAUST TO MINIMIZE DUSTING. MECHANICAL FOR GENERAL
AREA CONTROL.
Protective Gloves:RUBBER OR PLASTIC GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR CLEAN BODY-COVERING CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:>243F,>117C
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE, CRYSTALLINE SOLID.
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:DECOMPOSITION FROM OVERHEATING MAY
RELEASE HYDROGEN BROMIDE.
Disposal
Waste Disposal Methods:DISPOSE OF WASTE IN AN APPROVED CHEMICAL
INCINERATOR OR IN AN APPROVED CHEMICAL LANDFILL AS ALLOWED BY
CURRENT FEDERAL, STATE AND LOCAL LAWS AND REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.